- Call : +91-9810100941, +91-9971417676
- Time : 10:00 AM to 06:30 PM
This unit has been specially designed for hospitals physiotherapy centers where the machine is required to run constantly for may hours tocope with the rush of patients. Due to heavy duty components and rigid construction this equipment is most siitable for continuous use a treatment timer witch is provide to start the machine. This timer switch automatically disconnects the circuit at the comietion of predetermined dosage time. The intensity of heat can be adjust by output control Rotary Switch in 5 steps. The machine is provide with a wide tunning range to work with all types of condenser pads. The output can be adjust as per requirement of the patients under treatment. The unit has a maximum output of 500 Watts. The oprating frequency is 27.12 MHz. It has got a bulid in value safety circuit for extra life of the value.
Technical Details -
| Power Output | 500 Watts (Approx.) |
| Operating Frequency | 27.12 MHz |
| Wave Length | 11 Meters |
| Main Supply | 220 Volt 50 Cycles |
| Fuse | 5 Amp. |
| H.F. Power Source | Vacuum generating value |
Standard Accessories -
| Main cord | 1 Pc. |
| Pad electrode with cable, cloth & cover felt | 1 Pair |
| Spare fuse | 5 Pc. |
This unit has been specially designed for hospitals physiotherapy centers where the machine is required to run constantly for may hours tocope with the rush of patients. Due to heavy duty components and rigid construction this equipment is most siitable for continuous use a treatment timer witch is provide to start the machine. This timer switch automatically disconnects the circuit at the comietion of predetermined dosage time. The intensity of heat can be adjust by output control Rotary Switch in 5 steps. The machine is provide with a wide tunning range to work with all types of condenser pads. The output can be adjust as per requirement of the patients under treatment. The unit has a maximum output of 500 Watts. The oprating frequency is 27.12 MHz. It has got a bulid in value safety circuit for extra life of the value.
Technical Details -
| Power Output | 500 Watts (Approx.) |
| Operating Frequency | 27.12 MHz |
| Wave Length | 11 Meters |
| Main Supply | 220 Volt 50 Cycles |
| Fuse | 5 Amp. |
| H.F. Power Source | Vacuum generating value |
Standard Accessories -
| Main cord | 1 Pc. |
| Pad electrode with cable, cloth & cover felt | 1 Pair |
| Spare fuse | 5 Pc. |
Traction is a modern electro mechanical system, molded aluminum gearbox & Metal gear gives long life & jerk free traction. It is based on solid state circuity, it has silent, smooth & powerful motor to pull the appropriate weight separate traction force selection for CERVICAL & LUMBER.
Technical Detail -
| Voltage | 220V, 50 Cycles |
| Traction Force | 1,5,10,15,20,25,30,35,40,50,60 Secs. |
| Hold Time | 2,10,15,20,25,30,35,40,45,50,60 Secs. |
| Timer | Digital Display 0-99 Min. |
| Mode | Static & Intermitent |
Standard Accessories -
| Chest Belt | 1 Pc. |
| Lumber Belt | 1 Pc. |
| Patient Safety Switch | 1 Pc. |
| Spreader Bar | 1 Pc. |
Traction is a modern electro mechanical system, molded aluminum gearbox & Metal gear gives long life & jerk free traction. It is based on solid state circuity, it has silent, smooth & powerful motor to pull the appropriate weight separate traction force selection for CERVICAL & LUMBER.
Technical Detail -
| Voltage | 220V, 50 Cycles |
| Traction Force | 1,5,10,15,20,25,30,35,40,50,60 Secs. |
| Hold Time | 2,10,15,20,25,30,35,40,45,50,60 Secs. |
| Timer | Digital Display 0-99 Min. |
| Mode | Static & Intermitent |
Standard Accessories -
| Chest Belt | 1 Pc. |
| Lumber Belt | 1 Pc. |
| Patient Safety Switch | 1 Pc. |
| Spreader Bar | 1 Pc. |
Is a short name of transcutaneous Electrical Nerev Stimulator. It generates electrical inputs that are sent through electrodes placed over nerve centers. It is a safe non-invasive, drug free and has no side effects. It can reduce the need for pain narcotics and drug. It works by two different methods. The unit is microprocess controlled.
Technical Details -
| Output Channel | 4 Channel |
| Frequency | 2, 10, 25, 50, 75, 100, 125, 150 Hz. |
| Timer | 0-99 minutes. |
| Program Mode | 8 |
Is a short name of transcutaneous Electrical Nerev Stimulator. It generates electrical inputs that are sent through electrodes placed over nerve centers. It is a safe non-invasive, drug free and has no side effects. It can reduce the need for pain narcotics and drug. It works by two different methods. The unit is microprocess controlled.
Technical Details -
| Output Channel | 2 Channel |
| Frequency | 2, 10, 25, 50, 75, 100, 125, 150 Hz. |
| Timer | 0-99 minutes. |
| Program Mode | 8 |
This Digitally Micro processor control digital display electro therapy device with is designed in a compact light weight powder coated chassis and produces low frequency sinosodial impulses for deep transmission by medium frequency modulation and programmed in sweep wave form for better stimulation and fast recovery from the acute & chronics conditions of pain and carrier frequency can also be changed for different impedence conditions with therapy modes and power equalizer of intensity balance control. unit can be used for a specific or conditional treatment by selecting treatment for desired time level for routine and different features can be selected as available for fast and easy recovery.
Technical Details -
| Input Voltage | 220V AC 50Hz |
| Display | FND Display |
| Intensity | 99mA |
| IFT Medium Freq. | 4 KHz |
| IFT Medium Exec. | 2 KHz |
| Base Freq. | 0-150 Hz |
| Sweep Freq. | 0-100 Hz |
| Therapy Modes | 4P IFT, 4P Vector, 2P Modulation |
| Sweep Programe | Rectangular Wave - 1/1 |
| Triangular Wave | 2/2 |
Standard Accessories -
| Output cable with jack pin | 2 Pairs |
| Silicone conductive rubber pads | 2 Pairs |
| Main Line Cord | 1 No. |
| Raxine Cover | 1 No. |
It is an electro therapy device compact, portable light weight unit micro computer controlled LCD based progammable device to reduce the deep pain by low frequency, low intensity impulse stimulation, which is carried by a medium frequency, carrier consist, programmable treatment parameters for interferntial therapy, Muscle Stimulator, tens and Ultrasonic which can be used for different, physiological & traumatic conditionsof deep muscle pain and wakness joints pain and vasculator disorders etc.
Technical Details -
| Input Voltage | 220V / AC 50 Hz |
| Display | Program LCD Display |
| Intensity | 99mA |
| IFT Medium Freq. | 4 KHz |
| Russian Current Freq. | 2.5 KHz |
| Base Freq. | 0-150 Hz |
| Sweep Freq. | 1-100 Hz |
| Therapy Modes | 4P IFT |
| 4P Vector | |
| 2P Modulation | |
| Sweep Programmed | Rectangular Wave 1/1 |
| Triangular Wave 1/5 | |
| Trapezoidal Wave 6/6 | |
| Muscle Stimulator | Interrputed Galvanic , Faradic, Surge Faradic |
| TENS | 8 Program Mode |
| Cont. / Pulse Mode 1 Mhz, 15/21 | |
| Watt cm2 Output | |
| Pre Fixed Program | 50 |
This compact transistorised unit is useful for treatment of muscle weakness, fuctional Paralysis resulting from Traumatic Neurosis, Hysterial of Neuropraxia, Flaceed Paralysisi, Spastic Paralysisi, Cardio Vascular Disdrers, Musele Strains etc. This Therauptic Muscle Stimulator with Galvanic interrupted Galvanic, Faradic and Surge Faradic currents comes in . This used for diagnosis and the extent of Muscle lesion. It is used for diagnosis of muscle activities by plotting S-D Curve of the defective muscle. S-D Curve can be plotted on a semilog graph sheet. Pulse width variations are in 10 steps from .01 to 1000MS.
Salient Features -
| Input Voltage | 220 A.C. 50 Hz |
| Gabanic | Maximum output 100 Volt |
| Interrupted Galvanic | A Switch to select 4 different mode of frequency |
| Faradic | Compriser 40 pulse each pulse of 0.9ms |
| Surge Faradic | Step less control to increases |
This compact transistorised unit is useful for treatment of muscle weakness, fuctional Paralysis resulting from Traumatic Neurosis, Hysterial of Neuropraxia, Flaceed Paralysisi, Spastic Paralysisi, Cardio Vascular Disdrers, Musele Strains etc. This Therauptic Muscle Stimulator with Galvanic interrupted Galvanic, Faradic and Surge Faradic currents comes in . This used for diagnosis and the extent of Muscle lesion. It is used for diagnosis of muscle activities by plotting S-D Curve of the defective muscle. S-D Curve can be plotted on a semilog graph sheet. Pulse width variations are in 10 steps from .01 to 1000MS.
Salient Features -
| Input Voltage | 220 A.C. 50 Hz |
| Gabanic | Maximum output 100 Volt |
| Interrupted Galvanic | A Switch to select 4 different mode of frequency |
| Faradic | Compriser 40 pulse each pulse of 0.9ms |
| Surge Faradic | Step less control to increases |
It is an electro therapy device compact, portable light weight unit micro computer controlled LCD based progammable device to reduce the deep pain by low frequency, low intensity impulse stimulation, which is carried by a medium frequency, carrier consist, programmable treatment parameters for interferntial therapy, Muscle Stimulator, tens and Ultrasonic which can be used for different, physiological & traumatic conditionsof deep muscle pain and wakness joints pain and vasculator disorders etc.
Technical Details -
| Input Voltage | 220V / AC 50 Hz |
| Display | Program LCD Display |
| Intensity | 99mA |
| IFT Medium Freq. | 4 KHz |
| Russian Current Freq. | 2.5 KHz |
| Base Freq. | 0-150 Hz |
| Sweep Freq. | 1-100 Hz |
| Therapy Modes | 4P IFT |
| 4P Vector | |
| 2P Modulation | |
| Sweep Programmed | Rectangular Wave 1/1 |
| Triangular Wave 1/5 | |
| Trapezoidal Wave 6/6 | |
| Muscle Stimulator | Interrputed Galvanic , Faradic, Surge Faradic |
| TENS | 8 Program Mode |
| Cont. / Pulse Mode 1 Mhz, 15/21 | |
| Watt cm2 Output | |
| Pre Fixed Program | 50 |
It is an electro therapy device compact, portable light weight unit micro computer controlled LCD based progammable device to reduce the deep pain by low frequency, low intensity impulse stimulation, which is carried by a medium frequency, carrier consist, programmable treatment parameters for interferntial therapy, Muscle Stimulator, tens and Ultrasonic which can be used for different, physiological & traumatic conditionsof deep muscle pain and wakness joints pain and vasculator disorders etc.
Technical Details -
| Input Voltage | 220V / AC 50 Hz |
| Display | Program LCD Display |
| Intensity | 99mA |
| IFT Medium Freq. | 4 KHz |
| Russian Current Freq. | 2.5 KHz |
| Base Freq. | 0-150 Hz |
| Sweep Freq. | 1-100 Hz |
| Therapy Modes | 4P IFT |
| 4P Vector | |
| 2P Modulation | |
| Sweep Programmed | Rectangular Wave 1/1 |
| Triangular Wave 1/5 | |
| Trapezoidal Wave 6/6 | |
| Muscle Stimulator | Interrputed Galvanic , Faradic, Surge Faradic |
| TENS | 8 Program Mode |
| Cont. / Pulse Mode 1 Mhz, 15/21 | |
| Watt cm2 Output | |
| Pre Fixed Program | 50 |
This unit has been specially designed for hospitals physiotherapy centers where the machine is required to run constantly for may hours tocope with the rush of patients. Due to heavy duty components and rigid construction this equipment is most siitable for continuous use a treatment timer witch is provide to start the machine. This timer switch automatically disconnects the circuit at the comietion of predetermined dosage time. The intensity of heat can be adjust by output control Rotary Switch in 5 steps. The machine is provide with a wide tunning range to work with all types of condenser pads. The output can be adjust as per requirement of the patients under treatment. The unit has a maximum output of 500 Watts. The oprating frequency is 27.12 MHz. It has got a bulid in value safety circuit for extra life of the value.
Technical Details -
| Power Output | 500 Watts (Approx.) |
| Operating Frequency | 27.12 MHz |
| Wave Length | 11 Meters |
| Main Supply | 220 Volt 50 Cycles |
| Fuse | 5 Amp. |
| H.F. Power Source | Vacuum generating value |
Standard Accessories -
| Main cord | 1 Pc. |
| Pad electrode with cable, cloth & cover felt | 1 Pair |
| Spare fuse | 5 Pc. |
The Lasermed product range comprises two device that differ in the number of output : 1 output of Lasermed 2100. Automatic setting of treatment time in accordance with power supplied and the scanning area selected. Transmitting power set in accordance with the treatment time and scanning area selected. Supplied with MLA 1-25 probe.
Technical Details -
| Supply | 220V - 50Hz |
| Power | 100 MW |
| Wave length | 810 mm |
| Treatment Time | 0-99 Minutes |
| Pulse Frequency | 9 steps 10Hz to 5KHz |
| Sweep | 10Hz to 5KHz |
| Pulse width | 100 us nominal |
| Prog. | 46 |
Salient Features -
Do you suffer from pains on back, Shoulder, ankle, Wrist, neck, elbow or knee ? All debilitating conditions make life experiences callenging and painful. Mow there is a fast, drug free, non-invasive solution to help you get back to enjoying many pleasure of life -Laser pain Relief Instrument from Raycome Health.
Specification -
| Laser medium | GaAIAS-Semicounductor Terminal |
| laser output power. | 500mW |
| Predominantly Laser output Wave length | 810mm |
| Probe indication light wavelength | 650mm |
| Ambient temperature | 50c ~ 400c |
| Relative humidity | <_80% |
| Output Frequency | Mono Polar Generator 500 Khz +- 25Khz |
| Puri Cut | 400 watts at 500 Ohms Load |
| Blend II cut | 300 watts at 500 Ohms Load |
| Blend I Cut | 225 watts at 500 Ohms Load |
| Coagulation | 160 watts at 500 Ohms Load |
| Bipolar Coag | 100 watts at 125 Ohms Load |
| Spray Coag | 100 watts at 125 Ohms Load |
| Rated Frequency | 450KHz |
| Pure Cut : HF Voltage wave form | Unmodulated Sinusoidal |
| Blend Cut : HF Voltage wave form | Modulated Sinusoidal |
| Max HF Power | 250 watt/500 Ohms Load |
| Monopolar Coag : Max HF Power | 160 watt/500 ohms Load |
| Wave form | Modulated Sinusoidal |
| Bipolar Cut : Max HF Power | 100 watt/150 Ohms Load |
| Wave form | Unmodulated Sinusoidal. |
| Blend : Max HF Power | 80 watt/125 Ohms Load |
| Wave form | Amplitude Modulated Sinusoidal |
| Bipolar Coag : Max HF Power | 80 watt/125 Ohms Load |
| Wave form | HF Modulated sinusoidal |
This appliance is latest development with fully Solid state Microprocessor Controlled Unit, with digital timer & intensity display and is very lightweight compact and portable. The sound head with a special transducer is designed to keep a very good skin contact for deep ultrasound therapy. The ultrasonic wavesdiffer from other electromagnatic radiation such as short wave, Microwave etc. as the energy is propagated as mechanical vibrations and gives a massaging effect to the deep tender part of the muscle. This is very effective in neuromuscular and muscular-skeletal diseases including arthritis, sinussitic etc. The treatment head gives continuous or pulsed ultrasound waves obtained through a selective knob up to 15 watts. in continuous and 21 watts in pulsed modes.
Technical Details -
| Power output | 15 Watts in continuous mode |
| 12 Watts in pulse mode | |
| Output mode | Continuous mode & pulse mode |
| Timer | 0 to 30 mins (Digital) |
| Main Supply | 220 volt 50 cycles |
| Output | Digital Display |
| Pulse Mode | 1:10, 1:7, 1:4, 1:1 |
Standard Accessories -
| Ultrasonic applicator | 1 Pc |
| Applicator Stand | 1 Pc |
| Space Fuse | 1 Pc |
| Jelly Bottle | 1 Pc |
This appliance is latest development with fully Solid state Microprocessor Controlled Unit, with digital timer & intensity display and is very lightweight compact and portable. The sound head with a special transducer is designed to keep a very good skin contact for deep ultrasound therapy. The ultrasonic wavesdiffer from other electromagnatic radiation such as short wave, Microwave etc. as the energy is propagated as mechanical vibrations and gives a massaging effect to the deep tender part of the muscle. This is very effective in neuromuscular and muscular-skeletal diseases including arthritis, sinussitic etc. The treatment head gives continuous or pulsed ultrasound waves obtained through a selective knob up to 15 watts. in continuous and 21 watts in pulsed modes.
Technical Details -
| Power output | 15 Watts in continuous mode |
| 12 Watts in pulse mode | |
| Output mode | Continuous mode & pulse mode |
| Timer | 0 to 30 mins (Digital) |
| Main Supply | 220 volt 50 cycles |
| Output | Digital Display |
| Pulse Mode | 1:10, 1:7, 1:4, 1:1 |
Standard Accessories -
| Ultrasonic applicator | 1 Pc |
| Applicator Stand | 1 Pc |
| Space Fuse | 1 Pc |
| Jelly Bottle | 1 Pc |
This appliance is latest development with fully Solid state Microprocessor Controlled Unit, with digital timer & intensity display and is very lightweight compact and portable. The sound head with a special transducer is designed to keep a very good skin contact for deep ultrasound therapy. The ultrasonic wavesdiffer from other electromagnatic radiation such as short wave, Microwave etc. as the energy is propagated as mechanical vibrations and gives a massaging effect to the deep tender part of the muscle. This is very effective in neuromuscular and muscular-skeletal diseases including arthritis, sinussitic etc. The treatment head gives continuous or pulsed ultrasound waves obtained through a selective knob up to 15 watts. in continuous and 21 watts in pulsed modes.
Technical Details -
| Power output | 15 Watts in continuous mode |
| 12 Watts in pulse mode | |
| Output mode | Continuous mode & pulse mode |
| Timer | 0 to 30 mins (Digital) |
| Main Supply | 220 volt 50 cycles |
| Output | Digital Display |
| Pulse Mode | 1:10, 1:7, 1:4, 1:1 |
Standard Accessories -
| Ultrasonic applicator | 1 Pc |
| Applicator Stand | 1 Pc |
| Space Fuse | 1 Pc |
| Jelly Bottle | 1 Pc |
